Flange bearing housing-silica sol precisio...
This is a component used in oil pumps;
Part specifications length x width x height :φ128mmx38.5mm, weight: 1.42Kg;
Material : ZCuSn10P1
Valve-Silicone Sol Precision Casting Carbo...
This is a fitting for use in water treatment systems;
Specification of the part LxWxH:150mmx150mmx180mm, wall thickness:3mm, weight:2.3Kg;.
Material: carbon steel Q235
Testing requirements of the product: air tightness test, pass 500kPa compressed air, hold pressure for 1min, no leakage;
EGR gas chamber-stainless steel precision ...
This is a part used in automobile exhaust gas treatment system,EGR cooler.
The specification of the part is LxWxH:60mmx60mmx100mm, wall thickness:2.5mm, weight:0.72Kg;
Material:stainless steel 304.
Product testing requirements: air tightness test, pass 500kPa compressed air, hold pressure for 1min, no leakage;
Heat Exchanger Water Tube - Stainless Stee...
This is a part used in the heat exchange system of commercial vehicles.
The specification of the part is LxWxH:191mmx60mmx132mm, wall thickness:2.5mm, weight:0.91Kg.
Material: stainless steel 304.
Product testing requirements: air tightness test, pass 500kPa compressed air, holding pressure for 1min, no leakage;
End caps-Copper precision castings
This is a part used in marine vessel components, sea fresh water heat exchanger system.
The specification of the part is LxWxH:232mmx232mmx68mm, wall thickness:7mm, weight:3.25Kg.
Material:ZCuSn12.
Testing requirements of the product: air tightness test, pass 0.5MPa compressed air, hold pressure for 1min, no leakage.
Inlet and outlet end caps-Brass precision ...
This is a part used in marine vessel components, sea fresh water heat exchanger system.
The specification of the part is LxWxH:264mmx268mmx90mm, wall thickness:7mm, weight:9.81Kg.
Material:ZCuZn16Si4.
Product testing requirements: air tightness test, pass 0.9MPa compressed air, holding pressure for 30min, no leakage.
Brake ring:Copper precision casting parts
This is an electric power electrical accessory
Specification of the part LxWxH:80mmx80mmx10mm, weight:190g.
Material: BRONZE
hinge:lower precision casting for elf fus
This is a power electrical parts
Specification of the part LxWxH:76mmx80mmx28mm, wall thickness 4mm: weight:250g.
Material: Red Brass C83600
Inlet and outlet chambers-copper precision...
This is a part used in marine vessel components, sea fresh water heat exchanger system.
The specification of the part is LxWxH:235mmx232mmx100mm, wall thickness:6mm, weight:6.52Kg.
Material:ZCuSn12.
Testing requirements of the product: air tightness test, pass 0.5MPa compressed air, hold pressure for 1min, no leakage.
Pull ring-Brass precision casting
This is a power electrical fitting
Specification of the part LxWxH:79mmx96mmx18mm, wall thickness:10mm, weight:240g.
Material: Silicon Bronze
Inlet and outlet end caps-Brass precision ...
This is a part used in marine vessel components, sea fresh water heat exchanger system
The specification of the part is LxWxH:264mmx268mmx100mm, wall thickness:7mm, weight:11.62Kg.
Material: ZCuSn12.
Testing requirements of the product: air tightness test, pass 0.9MPa compressed air, hold pressure for 30min, no leakage.
Welding equipment-Stainless steel precisio...
This is a fixed tooling for product welding.
The specification of the part LxWxH:188mmx148mmx64mm, wall thickness:4mm, weight:1.34Kg;
Material:made of stainless steel 304.