Stainless steel
EGR gas chamber-stainless steel precision ...
This is a part used in automobile exhaust gas treatment system,EGR cooler.
The specification of the part is LxWxH:60mmx60mmx100mm, wall thickness:2.5mm, weight:0.72Kg;
Material:stainless steel 304.
Product testing requirements: air tightness test, pass 500kPa compressed air, hold pressure for 1min, no leakage;
Heat Exchanger Water Tube - Stainless Stee...
This is a part used in the heat exchange system of commercial vehicles.
The specification of the part is LxWxH:191mmx60mmx132mm, wall thickness:2.5mm, weight:0.91Kg.
Material: stainless steel 304.
Product testing requirements: air tightness test, pass 500kPa compressed air, holding pressure for 1min, no leakage;
Welding equipment-Stainless steel precisio...
This is a fixed tooling for product welding.
The specification of the part LxWxH:188mmx148mmx64mm, wall thickness:4mm, weight:1.34Kg;
Material:made of stainless steel 304.
Heat Exchanger Water Tube - Stainless Stee...
This is a part used in the heat exchange system of commercial vehicles.
The specification of the part is LxWxH:262mmx60mmx164mm, wall thickness:2.5mm, weight:1.3Kg.
Material:stainless steel 304.
Product testing requirements: air tightness test, pass 500kPa compressed air, holding pressure for 1min, no leakage.
EGR Water Chamber - Stainless Steel Precis...
This is a part used in automobile exhaust gas treatment system, EGR cooler.
The specification of the part is LxWxH:62mmx46mmx37mm, wall thickness:2.5mm, weight:113g.
Material:stainless steel 304.
Product testing requirements: air tightness test, pass 500kPa compressed air, hold pressure for 1min, no leakage.
EGR Intake Chamber - Stainless Steel Preci...
This is a part used in automobile exhaust gas treatment system, EGR cooler.
The specification of the part is LxWxH:80mmx70mmx48mm, wall thickness:2.5mm, weight:：296g.
Material:stainless steel 304.
Product testing requirements: airtightness test, 500kPa compressed air, holding pressure for 1min, no leakage.
EGR outlet chamber - Stainless steel preci...
This is a part used in automobile exhaust gas treatment system, EGR cooler.
The specification of the part is LxWxH:58mmx34mmx120mm, wall thickness:2.5mm, weight:：452g.
Material:stainless steel 304.
Product testing requirements: airtightness test, 500kPa compressed air, holding pressure for 1min, no leakage.
Stainless steel chamber body produced by p...
This is a part used in automobile exhaust gas treatment system, EGR cooler.
The specification of the part is LxWxH:132mmx55mmx85mm, wall thickness:2.5mm, weight:351g.
Material:stainless steel 304.
Product testing requirements: airtightness test, 500kPa compressed air, holding pressure for 1min, no leakage.